Using The Pair Function; Dialing With One Touch Dial - Kyocera W65K Basic Manual

Using the Pair Function

1
When the standby screen is displayed,
%
press , and select the partner
H
with .
The name and phone number/E-mail address
for the pair partner are displayed.
2
Select from "
E
with and press
■ With
Make a call to the partner.
■ With
Send E-mail to the partner referring to steps 5 to 7 of "Creating and Sending E-mail"
(→Page 45).
■ With
Send C-mail to the partner referring to steps 5 to 6 of "Creating and Sending C-mail"
(→Page 51).

Dialing with One Touch Dial

You can make a call to any of the phone numbers registered to pair
partners 1 to 3 by holding down
at least one second.
Register partners to the Pair function before hand (→Page 42).
1
When the standby screen is
displayed, hold down any one of
3
to for at least one second.
A call is made to the pair partner assigned the
number of the number keypad.
Note
● If no pair partner is registered to an assignable number on the keypad, a
screen appears asking if you want to register the pair partner. Select
"YES" and press
", " ", or "
+
[Select].
1 2
, , or
1
+ [OK], and register the pair partner (→Page 42). a
"
3
on the number keypad for
43