TO UNCLIP YOUR PANELS WITH THE DEDICATED NESPRESSO KEY
1
2
1
3
Unplug the machine and remove
the water tank and maintenance
unit.
5
Remove the panel.
8
2
Place the machine on the side on a
clean and smooth surface to avoid
damaging your panel.
NOTE: use only the Nespresso key to unclip your panels.
CAUTION: do not change the panels when the machine is hot
(wait 10 minutes after the last brewing).
NOTE: these panels are designed for Nespresso Pixie Clips machine.
3
Use the Nespresso key in the four
holes to unclip the panels.
4
Unclip the panel by rotating the
Nespresso key as shown in the
picture.