Using The Timepiece App - Casio WSD-F20 User Manual

5. At the bottom of the display, tap
6. Press the power button to exit the MOMENT SETTER
app.
After performing the above operation, you need to start up the Activity
●
app and start a Trekking measurement operation to actually receive
notifications. See
Note
A notification from MOMENT SETTER is deleted automatically after a fixed
●
amount of time.
Since speed measurement, distance traveled measurement, and current
●
location detection are performed using the watch's or your smartphone's
GPS function, there may be some measured value error. Accuracy is
particularly poor in a ravine or canyon, among buildings, indoors, and in
other areas where signal reception is bad.
You can disable all MOMENT SETTER settings with a single operation.
●
After reading
under "All Off".

Using the Timepiece App

The Timepiece app enters Timepiece Mode, displays the current time on the
monochrome display, and disables all other non-timekeeping watch
functions. Use this app when you want to cut power consumption to the
absolute minimum and display the current time only.
Important!
In Timepiece Mode, apps, location information, Wi-Fi, and smartphone
●
linking (notification reception, etc.) are all disabled.
While the watch is in Timepiece Mode, you will not be able to change any
●
settings related to the current time and date (time zone auto switching,
smartphone time and date sync, including summer time adjustment, etc.)
To update the time setting, every couple of days you should exit Timepiece
Mode and establish a connection with a smartphone. If you have a WSD-
F20 or WSD-F20S watch, you can perform
time settings even if the watch is not connected with a phone.
"Using the Activity
"Common Outdoor Function
App".
Settings", perform the operation
GPS Time Calibration
EN-43
to toggle it to .
to adjust