Basic Activity App Operations
To do this:
Start measurement
(excluding Snow
Start a Snow
*3
measurement operation
(while
"Auto
Record" is
"ON")
Start a Snow
*3
measurement operation
(while
"Auto
Record" is
"OFF")
Stop a measurement
operation
*4
Input fishing results
during Fishing
measurement
*3 WSD-F20 and WSD-F20S only
*4 The Activity app automatically shuts down 20 hours after measurement
starts.
Important!
Note that if the watch switches to the monochrome LCD screen while the
●
Activity app is performing a measurement operation, the values being
measured will not be displayed. To view values being measured, you will
need to tap the display and switch to the color LCD screen.
Selecting ON for the "Always-on screen" setting is recommended while
●
using the Activity app. "Always-on screen" is an Android Wear setting item.
For details, visit the website below.
https://support.google.com/androidwear/
Select the type of activity whose data you want
to measure and then tap "START".
)
*3
Select the type of activity whose data you want
to measure and then tap "BEGIN".
Measurement will start automatically when
●
the watch detects the start of a Snow run.
1. Select the type of activity whose data you
want to measure and then tap "BEGIN".
2. To start measurement, press the APP
button.
After the activity whose data is being measured
is finished, tap "STOP" (or "END").
While a Fishing data measurement operation is
in progress, display the fishing result screen
and then press the APP button or tap
Perform this operation:
EN-38
.