Advertisement
Setting the clock
1
In standby mode, press and hold DISPLAY/CLOCK. The clock digits flash on
the display panel.
2
Press
TUNING à / á
hours.
3
Press
í/ ë
to set the minutes.
4
Press
to select between 12 hour and 24 hour display.
PROG
5
Press
DISPLAY/CLOCK
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the video cables are not connected accordingly, see the user manual
for proper progressive scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode then turn on to interlaced mode.
2) Select "OFF" in PROGRESSIVE menu of the system setup menu to turn off progressive
scan, then press SYSTEM MENU on the remote to exit the system menu.
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
(or
à / á
on the remote control) to set the
agian to store the setting.
– – Audio Setup Page – –
NIGHT MODE
DIGITAL Output
Dolby Digital Setup
– – Preference Page – –
Audio
Subtile
Disc Menu
Parental
Password
Divx Subtitle
Default
Advertisement
