Janome Skyline s7 Service Manual page 34

Presser foot lifter stopper position (2)
Front bracket
Setscrew H
Supporter spring
Front side of the machine
Needle bar
Mechanical adjustment
Setscrew I
Presser foot lifter
stopper
Hexagonal socket
screw
Presser foot lifter
stopper
39.6 mm
Presser foot spring
release base
32
6. Remove the supporter spring.
Remove the setscrews H and I.
Remove the front bracket.
To adjust:
1. Turn the handwheel toward you to lower the needle.
Raise the presser foot lifter.
Loosen the hexagonal socket screw (use an Allen
wrench of 2.5 mm width across flats) of the presser
foot lifter stopper from the front side of the machine.
2. Adjust the distance between the presser foot spring
release base and the presser foot lifter stopper to 39.6
mm. Tighten the hexagonal socket screw.