About This Manual - Hirschmann RS40 User Manual

About this Manual

About this Manual
The "Redundancy Configuration" user manual contains all the information
you need to select a suitable redundancy procedure and configure it.
The "Basic Configuration" user manual contains all the information you need
to start operating the device. It takes you step by step from the first startup
operation through to the basic settings for operation in your environment.
The "Installation" user manual contains a device description, safety instruc-
tions, a description of the display, and all the other information that you need
to install the device before you begin with the configuration of the device.
The "Industry Protocols" user manual describes how the device is connected
by means of a communication protocol commonly used in the industry, such
as EtherNet/IP and PROFINET.
The "Web-based Interface" reference manual contains detailed information
on using the Web interface to operate the individual functions of the device.
The "Command Line Interface" reference manual contains detailed informa-
tion on using the Command Line Interface to operate the individual functions
of the device.
The Network Management Software HiVision provides you with additional
options for smooth configuration and monitoring:
Event logbook.
Configuration of „System Location" and „System Name".
Configuration of the network address range and SNMP parameters.
Saving the configuration on the device.
Simultaneous configuration of multiple devices.
Configuration of the port display color red for a connection error.
Redundancy L2E
Release 4.1 03/08
5