Dell Z9000 Quick Start Manual page 8

Task (continued)
Step
Attach the brackets to the sides of the chassis on either side using four
2
screws for each bracket.
Attach the bracket so that the "ear" faces to the outside of the chassis.
Install a Chassis into the Rack or Cabinet
To install the chassis into a rack or cabinet, follow these steps:
Step Task
Z9000 chassis in place while a second person attaches the brackets to
the posts.
Attach the bracket "ears" to the rack or cabinet posts using two screws
1
for each bracket. Ensure the screws are tightened firmly. The example
here shows the mounting brackets on the I/O side, but you can use either
side.
6
Installing the Hardware
I/O side
NOTE:
Dell Force10 recommends that one person hold the
View from I/O side
Connect to
rack/cabinet
(ears)
Rack/Cabinet
Post
Rack/Cabinet
Mounting Ears
Connect to
rack/cabinet
(ears)
Screws
View from PSU side