Progressive-Scan Tv Connections; Headphones - Yamaha DVR-S60 Owner's Manual

Progressive-scan TV connections (for U.S.A., Canada and Korean models only)
Your TV must be capable of handling progressive scanning and have component video input capability.
Green
TUNER VIDEO 1 VIDEO 2
Blue
IN OUT IN
Ω
75
VIDEO
FM
ANT
GND
IN OUT IN
AM
L L
ANT
Red
AUDIO
R R
Please follow the steps below before turning on the power.
1. Connect the component video cable (not supplied) between the
COMPONENT VIDEO OUT jacks of the unit and the COMPONENT
VIDEO INPUT jacks of the TV.
2. Set the VIDEO OUT SELECT switch to the COMPONENT position.
3. Set the VIDEO OUT SCAN SELECT switch to the SELECTABLE
position.
After all connections and settings on the rear panel are completed, turn on
the power of this system and the TV, then make the following setting.
4. Select "COMPONENT OUTPUT: PROGRESSIVE" in "Display" on
the SETTINGS ON THE SET UP MENU. (See page 16.)
Notes:
• Please refer to the instruction manual of your TV.
• When you connect the unit to your TV, be sure to turn off the power
and disconnect both units from the wall outlet until all the
connections have been made.
• After the above connections have been made, there are no video
signals from the MONITOR OUT VIDEO and VIDEO 1 VIDEO OUT
jacks.
Do not connect the unit to a VCR directly. The playback picture
will be distorted because DVD video discs are copy protected.

Headphones

Connect stereo headphones (not supplied) to the PHONES jack for monitoring or for private listening. The speakers are automatically disconnected when
headphones are connected.
1
COMPONENT
MONITOR OUT
VIDEO OUT SELECT
VIDEO OUT S-VIDEO
VIDEO
(DVD ONLY)
(DVD ONLY)
Y
COMPONENT S-VIDEO
2
P
B
VIDEO OUT
SCAN SELECT
P
R
SELECTABLE INTERLACE
480p/480i 480i
480p/480i
( DVD ONLY )
(DVD ONLY)
R FRONT
3
Component video cable
SPEAKERS
Ω
8
SUB
REAR
L CENTER R L WOOFER
SURROUND
Y
COMPONENT VIDEO INPUT
Progressive Scanning
While interlaced scanning produces one frame of video in two fields,
progressive scanning creates one frame in one field. Conventional
interlaced scanning constitutes one second with 30 frames (60 fields), but
progressive scanning constitutes it with 60 frames from scratch. Progressive
scanning can reproduce sharper picture with high resolution for still image
or other picture containing long texts or horizontal lines.
This model has compliance with 480p (progressive) system.
Interlaced scanning
Progressive scanning
DVR-S60 (U.S.A. model)
To AC outlet
C /P C /P
B B R R
TV with progressive-scan capability
+
U.C (US.CA)
MADE IN CHINA
11
E-