Honeywell LANSRLU1 Quick Start User Manual page 6

LANSRLU1
4.
Once the MAC Address, IP
Address and Subnet Mask have
been entered, select the Set IP
Address button.
DeviceInstaller will then per-
form the following steps before
the message 'Assign IP success-
ful!' appears:
• Test for an existing IP...
• Ping the new IP...
5.
Then select OK.
6.
On the Assign IP Address screen,
select Back.
7.
The main DeviceInstaller win-
dow will reappear. On the tool
bar, select
8.
Select 'Start Search' as well as the
'PC Network Class'.
6
.
Honeywell Access Systems
9.
After receiving a response from
the unit(s), displaying the
assigned IP, select 'Save'.
10.
Select 'OK' on the window con-
firming the successful update of
the unit(s).
11.
On the Search Network window,
select 'Back'.
The user will then be back at the
Main DeviceInstaller window.
12.
If adding more than one device,
select the one that is to be config-
ured first.
13.
On the Menu Bar, select Tool
then Device Manager...
A Device Management window
will appear displaying four man-
agement options.
7-101002-00