Get Started; Turn On; Find The Correct Viewing Channel - Philips HES4900/98 User Manual

4 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Turn on

1
Press .
»
The unit switches to the last selected
source.
2
Wait for automatic setup of wireless
connection between the main unit and
subwoofer.
» [PAIRING] (pairing) fl ashes.
»
If the connection succeeds,
(pair OK) is displayed and the blue
indicator on the subwoofer lights up.
»
If the connection fails,
(pair fail) is displayed and the green
indicator on the subwoofer lights up.
»
If the wireless connection fails, set up
the connection manually.
[PAIR OK]
[PAIR FAIL]
Set up wireless connection manually
1
In standby mode, press and hold SOURCE
on the main unit for 3 seconds.
» [PAIRING] (pairing) fl ashes.
2
Press and hold PAIR on the subwoofer for
3 seconds.
»
The blue and green indicators on the
subwoofer fl ash alternately.
»
If wireless connection succeeds,
OK] (pair OK) is displayed and the
blue indicators on the subwoofer lights
up.
3
Turn on the main unit again.
Note
•
If the wireless connection fails again, check whether
there is any confl ict or strong interference (for example,
interference from other electronic devices) around
your location. After removal of the confl ict or strong
interference, repeat the above procedures.
Find the correct viewing
channel
1
Press DISC to switch to disc mode.
[PAIR
EN 17