(4) Exchange the mount
To exchange the mount for digital camera and mount for film camera, follow the steps below.
a. Remove the eight mount fixing screws that fix the mount
to the lens body.
(In this step, do not loosen the two slotted head screws.)
b. Remove the mount from the lens body.
LENS
BARREL
c. Insert the two locating pins of the lens body into the locating holes of the mount to be installed,
and then install the previously detached eight mount fixing screws. Securely fix them.
LOCATING PINS (2 PLACES)
d. Adjust the flange focal length.
(refer to "Adjustment of Flange Focal Length" on page 6)
MOUNT
SIDE VIEW
MOUNT
- 5 -
REAR VIEW
SLOTTED
HEAD SCREWS
MOUNT FIXING SCREWS
(8 PLACES)
SIDE VIEW
FRONT VIEW OF MOUNT
LOCATING HOLES
MOUNT