Table of Contents
Advertisement
You can adjust the auto dimming rearview
mirror by hand so you can see to the rear
of your vehicle in the mirror. This rearview
mirror has a function of automatically
reducing glare from the lights of vehicles
behind you. The function works when the
ignition mode has been changed to "ON"
by pressing the engine switch.
• The mirror is always set to the automatic
dimming mode when the ignition switch
is in the "ON" position or the ignition
mode is "ON".
• When the switch (2) is pushed, the
green indicator (1) is lit, indicating that
the mirror is set to the automatic dim-
ming mode. To cancel the automatic
dimming mode, push the switch (2); the
indicator (1) then goes out.
• The auto dimming rearview mirror is
automatically deactivated while the gear-
shift lever is in the "R" position.
EXAMPLE
(3)
Do not touch or cover the sensor (3)
since this may impair normal opera-
tion of the system. Blocking glare
from the sensor with an object such
as a shade, sticker, accessory or bag-
gage may also impair proper opera-
tion of the system.
NOTICE
Do not hook anything heavy on the
mirror, or the mirror may break under
the weight.
Outside Rearview Mirrors
Adjust the outside rearview mirrors so you
can just see the side of your vehicle in the
mirrors.
Be careful when judging the size or
distance of a vehicle or other object
seen in the side convex mirror. Be
aware that objects look smaller and
appear farther away than when seen
in a flat mirror.
(3)
57L30020
WARNING
EXAMPLE
The switch to control the electric mirrors is
located on the driver's door panel. You can
adjust the mirrors when the ignition switch
is in the "ACC" or "ON" position, or the igni-
tion mode is "ACC" or "ON". To adjust the
mirrors:
1) Move the selector switch to the left or
WARNING
2) Press the outer part of the switch that
3) Return the selector switch to the center
BEFORE DRIVING
(1)
(2)
(4)
(1)
(3)
(2)
L
R
(4)
right to select the mirror you wish to
adjust.
corresponds to the direction in which
you wish to move the mirror.
position to help prevent unintended
adjustment.
(3)
79MH0217
2-18
Advertisement
Table of Contents
