Windshield Washer Fluid - Suzuki CIAZ Owner's Manual & Service Booklet

INSPECTION AND MAINTENANCE
EXAMPLE
(3)
(3) Retainer
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
EXAMPLE
(3)
7-31
EXAMPLE
(3)
(3)
79MH0756
(A) Up
(B) Down
NOTE:
When you install the metal retainers (3),
make sure the direction of metal retainers
as shown in the above illustrations.
5) Install the new blade in the reverse
order of removal, with the locked end
positioned toward the wiper arm.
Make sure the blade is properly
retained by all the hooks. Lock the
blade end into place.
6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm.
(3)
79MH0757

Windshield Washer Fluid

(A)
(B)
60MH072
Check that there is washer fluid in the tank.
Refill it if necessary. Use a good quality
windshield washer fluid, diluted with water
as necessary.
Do not use "anti-freeze" solution in
the windshield washer reservoir. This
can severely impair visibility when
sprayed on the windshield, and also
damage your vehicle's paint.
Damage may result if the washer
motor is operated with no fluid in the
washer tank.
EXAMPLE
80JM078
WARNING
NOTICE