Audio Setup Menu; Analog Output; Digital Audio Setup - Philips DVP5965K/94 User Manual

Audio Setup Menu

1
In disc mode, press SETUP.
2
Press 1 2 to select 'Audio Setup' icon.
3
Press OK to confirm.

Analog Output

This option allows you to set the stereo
analog output of your DVD Player.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {ANALOG OUTPUT}, then
press 2.
Stereo
Select this option when output delivers
sound from only the two front speakers.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
V SURR
Allows the DVD player to use virtual
surround sound effects.
Multi Channel
Select this to enable Multi-channel output.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
01-49_DVP5965K_94_eng_RC2
DVD Setup Menu Options

Digital Audio Setup

The options included in Digital Audio
Setup are: 'Digital Output' and 'LPCM
Output'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48K: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96K: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic (Flat) mode.
35 06/07/06, 2:13 PM
35