Front Panel Connectors - DFI-ITOX G4E606-P User Manual

2.6.8 Front Panel Connectors

HD-LED: Primary/Secondary IDE LED
This LED will light when the hard drive is being accessed.
RESET: Reset Switch
This switch allows you to reboot without having to power off the
system thus prolonging the life of the power supply or system.
SPEAKER: Speaker Connector
This connects to the speaker installed in the system chassis.
ATX-SW: ATX Power Switch
Depending on the setting in the BIOS setup, this switch is a "dual
function power button" that will allow your system to enter the Soft-
Off or Suspend mode. Refer to "Soft-Off By PWR-BTTN" in the
Power Management Setup (Chapter 3).
Hardware Installation
RESET
SPEAKER
J1
19
20
ATX-SW
HD-LED
1
2
PWR-LED
2
43