Front Panel Connectors - DFI-ITOX G7V300-P User Manual

Front Panel Connectors

HDD-LED - HDD LED
This LED will light when the hard drive is being accessed.
RESET SW - Reset Switch
This switch allows you to reboot without having to power off the
system.
PWR-BTN - Power Switch
This switch is used to power on or off the system.
PWR-LED - Power/Standby LED
When the system's power is on, this LED will light. When the system
is in the S1 (POS - Power On Suspend) state, it will blink every
second. When the system is in the S3 (STR - Suspend To RAM)
state, it will blink every 4 seconds.
N. C.
HDD-LED
RESET SW
N. C.
Pin Pin Assignment
1
N. C.
3 HDD Power
5 Signal
7 Ground
9 RST Signal
1 1 N. C.
Hardware Installation
HDD-LED
J9
RESET SW
Pin Assignment
Pin
LED Power
PWR-LED 2
LED Power
4
Signal
6
PWR-BTN Power
PWR-BTN 8
Signal
1 0
Key
Key 1 2
1 2
PWR-LED
PWR-BTN
1 11 2
55
2