DFI-ITOX G4E606-P User Manual page 86

4
Supported Software
4.1.2 Using the DMI Utility
s
n
↑ ↓ ← ← ← ← ←
↑ ↓ ↑ ↓
↑ ↓ ↑ ↓
→ → → → →
The four menus located on top of the DMI Configuration Utility screen
are Edit DMI, Add DMI, Load DMI File and Save DMI File. Use the
← or → (left or right) arrow keys to select a menu from the Menu
bar.
On the left side of the screen is a list of the system configuration items.
Use the ↑ or ↓ (up or down) arrow keys to select an item.
The commands at the bottom of the screen will allow you to navigate
through the various setup menus.
Edit DMI
1. Use the ← or → arrow keys to select the Edit DMI menu.
2. Highlight the item on the left screen that you would like to edit
by using the ↑ or ↓ arrow keys, then press <Enter>.
3. The cursor will move to the screen you select allowing you to edit
information. The screen will also display the auto-detected
information.
4. Press <F10> to update the edited information into the flash ROM.
86
Award DMI Configuration Utility Copyright Award Software Inc, 1996
[Edit DMI] [Add DMI] [Load DMI File] [Save DMI File]
BIOS
System
Enclosure/Chassis
Type : BIOS Information
Processor
Handle : 0000
Memory Controller
Vendor Name :
Memory Module
BIOS Version :
Memory Module
BIOS Starting Address Segment : E000
Memory Module
BIOS Build Date :
Memory Module
BIOS Characteristics :
Cache
Size of BIOS ROM : 0256K
Cache
Port Connector
Port Connector
Port Connector
Port Connector
Port Connector
Port Connector
Port Connector
System Slots
Move cursor ENTER-Accept
*** BIOS Auto Detect ***
DEL-Delete ESC-Abort&Exit