DFI-ITOX G4E606-P User Manual page 63

SPP
Allows normal speed operation but in one direction only.
"ECP (Extended Capabilities Port)"
Allows parallel port to operate in bidirectional mode and at a
speed faster than the normal mode's data transfer rate.
"EPP (Enhanced Parallel Port)"
Allows bidirectional parallel por t operation at maximum
speed.
If you selected EPP, the "EPP Mode Select" field is selectable. If
you selected ECP, the "ECP Mode Use DMA" field is selectable. If
you selected ECP+EPP, both "EPP Mode Select" and "ECP Mode
Use DMA" are selectable.
EPP Mode Select
This field is used to select the EPP mode of the parallel port.
ECP Mode Use DMA
This is used to select a DMA channel of the parallel port.
PWRON After PWR-Fail
Off When power returns after an AC power failure,
the system's power is off. You must press the
Power button to power-on the system.
On When power returns after an AC power failure,
the system will automatically power-on.
Former-Sts When power returns after an AC power failure,
the system will return to the state where you left
off before power failure occurs. If the system's
power is off when AC power failure occurs, it will
remain off when power returns. If the system's
power is on when AC power failure occurs, the
system will power-on when power returns.
Award BIOS Setup Utility
3
63