System Menu Options; Basic Operations; General Setup Page; Program - Philips DVP530 User Manual

System Menu Options

Basic Operations

1
Press SYSTEM MENU to enter the
Setup Menu.
2
Press OK to enter the next level
submenu or confirm your selection.
3
Press 1 2 to enter the submenu or
return to the previous menu.
4
Press 34 to highlight the desired menu.
To exit from the menu
Press SYSTEM MENU or select 'Exit
Setup Menu' and then press OK.
The settings will be stored in the
player's memory even if the player is
switched off.

General Setup Page

The options included in General Setup
page are: 'Program', 'OSD Language', and

'Screen Saver'.

Follow the steps below:
- - General Setup Page - -

Program

OSD Language
Screen Saver
Go To General Setup Page
1
Press SYSTEM MENU to enter the
setup menu.
2
Press 1 2 to select the 'General Setup'
page.
NOTE:
Some of the features in the System
Menu Options are described in
"Getting Started".
22
01-32 DVP530_78
Program (not for Picture CD/MP3)
To select favourite tracks/chapters
playback in preferred sequence.
1
Use the numerical keypad (0-9) to
direct input the tracks or chapters (single
track number with digit '0' in front, for
example '05').
2
Move the cursor by pressing 3 4 1 2 to
select START.
3
Press OK to start playback.
Helpful Hint:
– Program can be activated only when a
disc is in the DVD player.
Screen Saver
This function is used to turn the screen
saver on or off.
1
Press 34 to highlight 'Screen Saver'.
2
Enter its submenu by pressing 2.
3
Move the cursor by pressing 34 to
highlight the selected item.
On: In STOP, PAUSE or No DISC
mode, if no actions are performed about
5 minutes, the screen saver will be
activated.
Off: Screen saver is disabled.
22
Program:Chapter(01-12)
1 12
6
2 01 7
3 05 8
4 9
5 10
START Exit NEXT
- - General Setup Page - -
Program
OSD Language
Screen Saver On
Off
Screen Saver
8239 300 30442
17/03/2004, 3:48 PM