GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Removing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-085D0E34-796C-47EE-974F-FD132BFF6357
Prerequisites
1
Remove the battery.
2
Remove the
base
3
Remove the
optical
4
Remove the
memory
5
Follow the procedure from step 1 to step 3 in
6
Remove the
wireless
7
Remove the keyboard.
8
Remove the
computer
9
Remove the
heat-sink
10 Remove the
I/O
11
Remove the
system
GUID-66B213A1-1BA9-480B-BF8D-A97E28D9133F
Procedure
1
Note the antenna-cable routing and remove the antenna cables from its routing
guides on the palm-rest assembly.
computer. After working inside your computer, follow
After working inside your
cover.
drive.
modules.
card.
base.
assembly.
board.
board.
computer. For more safety best
www.dell.com/
"Removing the hard
Before
drive".
77