Functional Overview; Front And Rear Panels - Philips DVP522 User Manual

Functional Overview

Front and Rear Panels

STANDBY-ON B
– To switch the DVD Player to Standby
mode or ON
Disc tray
OPEN/CLOSE /
– Open/Close the disc tray
STANDBY-ON
Mains (AC Power Cord)
– Connect to a standard AC outlet
S-Video Out
– Connect to S-Video input of a TV
Video Out (CVBS)
– Connect to CVBS Video input of a TV
MAINS
S-VIDEO OUT
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
10
01-30 DVP522_69
OPEN/CLOSE
Y
VIDEO OUT
L
Pb
R
Pr COAXIAL
COMPONENT DIGITAL OUT AUDIO OUT
VIDEO OUT
10
2; PLAY/PAUSE
– To start or interrupt playback
– To stop playback
– Point the remote control towards this
– Shows the current status of the DVD
Audio Out (Left/Right)
– Connect to AUDIO inputs of an amplifier,
receiver or stereo system
Digital Out (Coaxial)
– Connect to coaxial AUDIO input of a
digital audio equipment
Component Video Out (Y Pb Pr)
– Connect to a TV with Y Pb Pr inputs
24/02/2004, 2:10 PM
9 STOP
IR Sensor
sensor
Display
Player
STOP PLAY/PAUSE
8239 300 32141