Dometic BR342 Installation And Operating Manual page 13

INSTALLATION INSTRUCTIONS
FIG. 17
ADB Hole
Alignment
2. Install two (2) (supplied) sheet metal screws in-
side return air opening to secure air distribution
box to ceiling template. See (FIG. 18).
3. Install eight (8) (supplied) wood screws inside
the front, rear and side doors to secure air distri-
bution box to ceiling. See (FIG. 18).
Hole In Ceiling
Template
Hole In
ADB Cover
9
FIG. 18
2 Sheet
Metal Screws
8 Wood Screws
4. Install front and rear doors.
5. 3ODFH ¿OWHU LQ UHWXUQ DLU JULOOH ,W PD\ DOUHDG\ EH
installed on some units. See (FIG. 19).
FIG. 19
Return Air
Vent Grille
6. Install return air vent grille into the air distribu-
tion box. Slide return air grille tab into slot in air
distribution box and rotate up and snap in place.
See (FIG. 20).
Filter