Use Philips Easylink - Philips 43PFL4451/V7 User Manual

4.8 Use Philips EasyLink

Get the most out of your HDMI-Consumer
Electronic Control (CEC) compliant devices
with Philips EasyLink enhanced control
features.
If your HDMI-CEC compliant devices are
connected through HDMI, you can control
them at the same time with your TV remote
control.
To enable Philips EasyLink, you need to:
• Connect HDMI-CEC
compliant devices through HDMI
• Configure each HDMI-CEC compliant
device properly
• Switch on EasyLink
Note
• The EasyLink-compliant device must be
switched on and selected as the source.
•
Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
4.9 Switch on or off EasyLink
1 Press
2 Select [Setup] > [Features] >
[EasyLink] > [EasyLink] .
3 Select [On] or [Off] , then press OK
Note
•
If EasyLink is OFF, all its submenus are
unavailable.
14 EN
EN 14
4.10 Switch the device ON or OFF
When an HDMI-CEC compliant device
is connected and TV switches to standby,
the device gets turned OFF automatically.
1 Press
2 Select [Setup] > [Features] >
[EasyLink] [EasyLink] > [Auto turn off] >
3 Select [On] or [Off], then press OK
When an HDMI-CEC compliant device
is connected and TV is switched ON, then
the device gets turned ON automatically.
4.11 Search the connected devices
Search the HDMI-CEC compliant devices
connected to your TV and list them using
Device list.
1 Press
2 Select [Setup] > [Features] >
[EasyLink] > [Device Search] >
4.12 Control the device using
tv remote
Now use a single remote to control your
CEC enabled device.
1 Press
2 Select [Setup] > [Features] >
[EasyLink] > [Device Menu]
Play Pause Prev. Next FR
FF
Press to select the function icon, press
OK button to confirm the function.
Stop