Side Connectors; Using Philips Easylink - Philips 43PFD5773/30 User Manual

Side Connectors

a USB
Data input into USB storage devices.
b Antenna/cable TV
Input for an antenna, cable or satellite signal.
ANTENNA
c HDMI 2
Digital audio and video input in Blu-ray disc
player and other HD digital devices.
Note
• Supported resolution:
HDMI 2 :FHD
26 EN-GB

Using Philips EasyLink

Taking full advantage of your Philips EasyLink
HDMI-CEC compatible devices can enhance
the control function and achieve the best
possible results.HDMI-CEC compatible devices
connected through the HDMI connector can be
controlled by a TV remote control.
To enable Philips EasyLink, you need to:
Make sure that each HDMI-CEC compatible
•
device can run normally.
• Switch to EasyLink
Note
•
EasyLink-compatible device must already be
turned on and is selected as a signal source.
• Philips does not guarantee its 100%
interoperability with all HDMI CEC devices.
Turn on or off EasyLink
Note
• Pease do not enable Philips EasyLink if you do
not intend to use it.
1
Press .
2
Select [TV Settings] > [EasyLink]>
[EasyLink].
3
Select [Off] or [On] and press OK (確認).
Turn on or off the EasyLink
remote control
Note
• Pease do not enable Philips EasyLink if you do
not intend to use it.
1
Press .
2
Select [TV Settings] > [EasyLink]>
[EasyLink remote control].
3
Select [Off] or [On] and press OK (確認).