Philips 43PFL4451/V7 User Manual page 15

4.5 More about MHL
MHL is interface for transmitting digital
audiovisual signals from mobile phones to
supported television sets. Note that it only
supports MHL ctemobile phones. To
support the MHL in your, kindly check the
operation manual of your phone.
when smart phone is to HDMI (MHL) port
of the TV with standard M cable, the
mobile screen is displayed on the TV
screen and some of mobile applications
can be operated by TV remote control.
How to use MHL
1) Connect MHL enabled phone with the
passive MHL cable (not supplied with
TV set) to HDMI1 port of TV.
2) Go to HDMI1 source with AV/TV key or
remote control.
3) MHL selected as Auto then phone
screen displayed on the TV screen.
NOTE:
1) Use standard certified MHL cables to
get desired connectivity results. If some
problem occurs in connecting your device
in MHL mode, then check your device
settings or consult your MHL phone
service center. Some mobiles use 5 pin
cable and some mobile use 11 pin cable
so, kindly choose proper MHL mode.
2) Depending on version, some MHL
devices may not accept TV remote control
commands.
3) MHL cable is not provided with TV set.
You need to buy separately.
4) Cannot do typing with TV remote
control. For this you can use blue tooth
compatible keyboard/mouse available in
market.
5) As the TV screen is big & its resolution
is more than phone, the video quality may
be lower in TV. So if any problem in video
quality please check content resolution of
your device.
4.6 More about ARC
ARC enables the digital sound to be the
output just using single HDMI cable
connected to ARC ebabled Home Theater
system player; However ARC is only
available through HDMI3 port of TV.
How to use ARC
1) Connect ARC enabled AV received
(Home Theater) through high speed
HDMI cable (HDMI 1.4 cable) to HDMI3
port of the TV.
2) Then go to settings menu of TV set ARC
function "ON".
3)Set ARC mode in connected player.
4) When ARC is set ON, then the TV
speaker will be deactivated & volume
source (any TV source) is routed to Home
theater.
4.7 More about USB TO USB
We have provided unique USB to USB
file transfer feature. To use this feature use
following steps below:
1) Connect one USB to each USB port of
the TV.
2) Go to multimedia by pressing TV/AV key
on remote or keypad.
3) Select either Picture, Music, Movie or
Text option in multimedia source
depending upon file to be transferred.
4) Select USB - DISK 1 or DISK 2, from
which you want to copy data and open it.
5) Go to the file to be copied and press the
'Yellow' favorite key on remote to 'Copy'.
6) Select USB DISK 1 or DISK 2, in which
you to paste the copied file.
7) Press 'Green' favorite key on remote to
'Paste'.
8) 'Copying, please wait!' message and
progress bar will be displayed as the copy
Paste operation is being performed.
9) After copying is successful, 'Copy
Success message is displayed.
NOTE:-
1) Copy time will vary depending upon file
size. larger files will need more time.
2)Multiple files can be copied at a time.
3) Copied file will be presented in USB
from which files was copied. It will not be
'Cut - Paste'.
4) The USB to USB file transfer will not be
performed if receiving USB does not have
enough space.
5) NTFS HARD DISK cannot support write
and delete in USB to USB transfer.
6) Boot logo image can not read from
NTFS HARD DISK
EN 13