Maintaining The Saw; Repair; Storage - ALDI WS 800-1 User Manual

Reciprocating saw

Maintaining the saw

− Keep the saw and the vents clean to ensure proper, safe work.
− Regularly check whether dust or debris have penetrated the openings near the
motor and around the On/Off switch
− Regularly lubricate all moving parts.
− Before and after each use, check the saw and accessories (e.g. fitted tools) for
wear and damage. Replace any accessory parts if necessary. Observe the tech-
nical requirements in the process.
− Regularly check all fixtures. They could come loose over time due to vibration.
If you identify a damage, you must have it repaired by a specialist workshop to
prevent risks.

Repair

There are no parts that can be repaired by the user inside the saw. If you identify
damage, contact a specialist workshop or qualified personnel. Repairs performed by
the user and opening the housing void your warranty claim.
If the mains cord
can be obtained from the manufacturer or its After Sales Support. The mains cord may
only be replaced by a specialist workshop or qualified specialist personnel.
The LED work light
A new saw shoe 12

Storage

− Clean the saw before storing it (see chapter "Cleaning").
− Store the saw and accessories in a dry, frost-free place. The perfect storage tem-
perature ranges from 10 to 30 °C.
− If possible, store the saw in the transport case
− Always store the saw out of the reach of children.
Check the saw for possible signs of wear and damages before using it
again.
AFTER SALES SUPPORT
00800 34 99 67 53
GB IRE
9
is damaged, it must be replaced with a special mains cord that
3 cannot be replaced.
can be ordered from After Sales Support for a fee.
10 .
14 with the original packaging.
meister-service@meister-werkzeuge.de
GB IRE
Repair
21