Set The Ssid Of The Available Networks - Lancom OAP-54-1 Manual

LANCOM OAP-54-1 Wireless – LANCOM OAC-54-1 Wireless
Chapter 5: Advanced wireless LAN configuration
Configuration tool
WEBconfig
Terminal/Telnet
5.4.2

Set the SSID of the available networks

In the WLAN clients, the SSIDs of the networks to which the client stations are
to connect must be entered.
60
In 'Scan bands', define whether the client station scans just the 2.4 GHz,
just the 5 GHz, or all of the available bands to locate an access point.
Under WEBconfig or Telnet the settings for client mode can be found
under the following paths:
Menu/Table
Expert configuration
modes
Setup/Interfaces/WLAN/
Client modes
To enter the SSIDs, change to the 'General' tab under LANconfig in the
'Wireless LAN' configuration area. In the 'Interfaces' section, select the
first WLAN interface from the list of logical WLAN settings.
Enable the WLAN network and enter the SSID of the network the client
station should log onto.
Setup Interfaces WLAN Client