Configuration Protection; Instructions For Lanconfig - Lancom OAP-54-1 Manual

DHCP mode of operation
Off: The IP addresses required must be entered manually.
Server: The LANCOM OAP/OAC-54-1 Wireless operates as DHCP server
in the network; as a minimum its own IP address and the network
mask must be assigned.
Client: The LANCOM OAP/OAC-54-1 Wireless obtains its address infor-
mation from another DHCP server; no address information is required.
IP address and network mask for the LANCOM OAP/OAC-54-1
Wireless
Assign the LANCOM OAP/OAC-54-1 Wireless a free IP address from your
LAN's address range and enter the network mask.
Gateway address
Enter the gateway's IP address if you have selected 'Off' as the DHCP
mode of operation or if another network device is assuming the role of
gateway in the 'Server' mode of operation.
DNS server
Enter the IP address of a DNS server to resolve domain names if you have
selected 'Off' as the DHCP mode of operation or if another network device
is assuming the role of DNS server in the 'Server' mode of operation.
3.1.2

Configuration protection

Using a password secures access to the LANCOM OAP/OAC-54-1 Wireless's
configuration and thus prevents unauthorized modification. The device's con-
figuration contains a great deal of sensitive data such as data for Internet
access and should be protected by a password in all cases.
Multiple administrators can be set up in the configuration of the

LANCOM, each with differing access rights. Up to 16 different admi-
nistrators can be set up for a LANCOM OAP/OAC-54-1 Wireless.
Further information can be found in the LCOS reference manual under
"Managing rights for different administrators".
3.2

Instructions for LANconfig

Start up LANconfig by clicking Start
LANconfig. LANconfig automatically detects the new LANCOM devices in
the TCP/IP network.
LANCOM OAP-54-1 Wireless – LANCOM OAC-54-1 Wireless
Chapter 3: Basic configuration
Programs LANCOM
29