Connectors Of Lancom Oap-54-1 Wireless And Lancom Oac-54-1 Wireless - Lancom OAP-54-1 Manual

The following can be displayed for WLAN link:
Off
Green
Green
Green
ETH LAN connector status:
Off
Green
Green
2.3.2 Connectors of LANCOM OAP-54-1 Wireless and LANCOM OAC-
54-1 Wireless
The connections and switches of the LANCOM OAP-54-1 Wireless and
LANCOM OAC-54-1 Wireless are located on the bottom side.
³
Earth cable connector.
·
Connector for serial configuration cable and reset plug (see 'The reset
function').
»
Aux connector for external antennas. Diversity antennas are connected to
the Aux connector.
LANCOM OAP-54-1 Wireless – LANCOM OAC-54-1 Wireless
No WLAN network defined or WLAN module deactiva-
ted. The WLAN module is not transmitting beacons.
At least one WLAN network is defined and WLAN
module activated. The WLAN module is transmitting
beacons.
Inverse flashing Number of flashes = number of connected WLAN stati-
ons and P2P wireless connections, followed by a pause
(default).
Alternatively, the frequency of the flashed can indicate
the input sensitivity.
Blinking DFS scanning or other scan procedure.
No networking device attached
On (perma- Connection to network device operational, not data traffic
nently)
Flickering Data traffic
³ · »
Chapter 2: Installation
²
´
¿
17