Error Codes And Flashing Sequences - HomeMatic HmIP-PSM-UK Operating Manual

Troubleshooting
and produced with 100% conformity to this regulation.
During normal operation, the duty cycle is not usually
reached. However, repeated and radio-intensive teach-
in processes mean that it may be reached in isolated in-
stances during start-up or initial installation of a system. If
the duty cycle is exceeded, this is indicated by three long
flashes of the device LED, and may manifest itself in the
device temporarily working incorrectly. The device starts
working correctly again after a short period (max. 1 hour).
8.3

Error codes and flashing sequences

Flashing code
Short orange
flashing
1x long green
lighting
1x long red
lighting
16
Meaning
Radio trans-
mission/at-
tempting to
transmit
Transmission
confirmed
Transmission
failed
Solution
Please wait, until
transmission has
been confirmed.
You can continue
operation.
Please try again
(s. "8.1 Command
not confirmed" on
page 15).