ABB SM500F User Manual page 81

SM500F
Field mountable paperless recorder
IM/SM500F Rev. Z
Passwords are entered initially by the System Administrator but,
subsequently, any user can change their own password. When this
parameter is set to 'Yes', each user must change their password after it is
used for the first time following initial configuration – see also Section
7.6.5, page 80.
Enter the time period after which all passwords expire. After this period of
time, all users must change their passwords.
Enter the time period after which an inactive user's access privileges are
de-activated. A user is considered inactive if their password has not been
used. A user is de-activated by removal of their access privileges and can
be re-activated only by the System Administrator (User 1).
Enter the number of consecutive incorrect password entries allowed by a
user. If the number of incorrect entries exceeds this limit, the user's
access privileges are de-activated and can be reinstated only by the
System Administrator (User 1).
Passwords have a maximum length of 20 characters. Enter the minimum
length required for all new passwords.
7 Configuration
79