Table of Contents
Advertisement
3.1.9
Set a schedule
Programming rules:
� When programs overlap, the shortest program
is the leading program and overrule any longer
program;
� In some cases the setting of the airflow may be
increased by an automated software setting e.g.
the settings of the SENSOR VENTILATION 2 .
1. Navigate to TASK MENU.
2. Navigate to SCHEDULER.
3. Navigate to
- VENTILATION if you would like to set a schedule
for the airflow;
- COMFOCOOL 3 if you would like to set a
schedule for the ComfoCool Q600.
4. Select
- VIEW/EDIT to view/change a scheduler step;
- DELETE to remove a scheduler step.
5. Select
- NEW to create a new schedule step;
- STEP to change or view the selected schedule
step.
6. Navigate to the desired period.
7. Select your desired start time with the up and
down button.
8. Select CONFIRM after each number.
9. Select your desired end time with the up and
down button.
10. Select CONFIRM after each number.
11. Select/navigate to your desired setting.
3 This menu is only visible when the accessory is connected to the unit.
12 - EN
3.1.10 Manually set the heat recovery control (bypass)
for a specific duration
1. Navigate to TASK MENU.
2. Navigate to BYPASS.
3. Navigate to
- OPEN if you would like to minimise the heat
recovery control (outdoor air is supplied directly
into the dwelling);
- DISABLE if you would like to maximise the heat
recovery control.
4. Select the desired duration with the up and down
button.
5. Select CONFIRM.
Start the automatic heat recovery control before the
end of the duration:
1. Repeat step 1 and 2.
2. Navigate to AUTO.
3. Select CONFIRM.
4. Select BACK.
5. Select BACK.
3.1.11 Stop the ComfoCool Q600 for a specific
duration
1. Navigate to TASK MENU.
2. Navigate to COMFOCOOL 3 .
3. Navigate to OFF.
4. Select the desired duration with the up and down
button.
5. Select CONFIRM.
Start the ComfoCool Q600 before the end of the
duration:
1. Repeat step 1 and 2.
2. Navigate to AUTO.
Hide quick links:
Advertisement
Table of Contents
