Connect Power; Get Started; Prepare The Remote Control; Find The Tv Input Channel - Philips DVP3516 User Manual

Connect multi channel receiver
1
Connect the audio cables (not supplied) to:
• the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) jacks
on this product.
• the audio input jacks on the device.
Connect an analogue stereo system
FRONT L
FRONT R
1
Connect the audio cables (supplied) to:
• the AUDIO OUT FRONT L/R jacks on
this product.
• the audio input jacks on the TV.

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
of the product.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
FRONT L REAR L CENTER
FRONT R REAR R SUBWOOFER
MULTICHANNEL
AUDIO IN
AUDIO IN
Note
•
The type plate is located on the back of the product.
1
Connect the AC power cable to the wall
socket.
»
The product is ready to be set up for use.

4 Get started

Prepare the remote control

1
Press and push the battery compartment to
slide it open (see "1" in the illustration).
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery compartment
(see "3" in the illustration).
Note
•
If you are not going to use the remote control for a long
time, remove the batteries.
•
Do not mix batteries (old and new or carbon and
alkaline, etc.).
•
Batteries contain chemical substances, so they should be
disposed of properly.

Find the TV input channel

1
Press to turn on this product.
2
Turn on the TV and switch to the video input
channel (refer to the TV user manual on how
to select the A/V input channel).
EN 7