Find the correct viewing
channel
1
Press 2 to turn on the DVD player.
2
Turn on the TV and switch to the correct
video-in channel.
•
You may go to the lowest channel on
the TV, then press the Channel Down
button on the TV remote control until
you see the Video In channel.
•
You may press
on the TV remote control.
•
Usually this channel is between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO, etc..
Tip
•
See the TV user manual on how to select the correct
input on the TV.
•
If the audio output of this DVD player is routed
to other audio device (such as audio system
or receiver), turn on the audio device to the
appropriate audio input channel. Refer to the device
user manual for details.
° button repeatedly
Select menu display language
Note
•
You can skip this setting if this DVD player is
connected to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language as
per your TV setting.
1
Press SETUP.
[ General Setup ] menu is displayed.
2
Select [ OSD Language ], then press B.
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
•
The language options are different
depending on your country or region.
It may not correspond to the illustration
shown here.
3
Press vV to select a language, then press
OK.
Tip
•
You can set the default language for DVD audio
and disc menu, see chapter 'Adjust settings' - [
Preferences ] for details.
Auto (Eng)
English
Melayu
EN
13