Connect Audio Cables - Philips DVP3360K User Manual

Option 2: Connect to component
video jacks
Pr
Y
COMPONENT VIDEO OUT
1
Connect the component video cables (not
supplied) to the Y Pb Pr jacks on this DVD
player and the component video input
jacks on the TV.
• If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter 'Turn on Progressive Scan'
for details).
Tip
•
The component video input jacks on the TV may be
labeled as Y Pb/Cb Pr/Cr or YUV.
•
This type of connection provides good picture
quality.
10 EN
Pr
Pb Y
COMPONENT
VIDEO IN
Option 3: Connect to video (CVBS)
jack
1
Connect a composite video cable
(supplied) to the TV OUT jack on this
DVD player and the video input jack on
the TV.
Tip
•
The video input jack on the TV may be labeled as
A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
•
This type of connection provides standard picture
quality.

Connect audio cables

Connect the audio from this DVD player to the
TV to allow sound output through the TV.
1
Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the TV.
VIDEO IN
AUDIO IN