Philips DVP3360K User Manual page 29

[ Analog Output ]
Select the analog audio setting based on
the audio device that is connected through
the analog audio jack.
• [ Stereo ] – for stereo output.
• [ LT/RT ] – for surround sound output
through two speakers
[ Digital Audio ]
Select the setting based on the digital
ampliÀ er/receiver that is connected
through the digital jack.
• [ Digital Output ] – select the type of
digital output.
Option Description
[ Off ] Disable digital output.
[ All ] The device supports
multi-channel audio
formats.
[ PCM Only ] The device is not capable
of decoding multi-channel
audio. Audio is
downmixed to two-
channel sound: see
LPCM Output ]
• [ LPCM Output ] – select the LPCM
(Linear Pulse Code Modulation) output
sampling rate.
Option Description
[ 48kHz ] For discs recorded at
sampling rate of 48 kHz.
[ 96kHz ] For discs recorded at the
sampling rate of 96 kHz.
•
[ Digital Audio ]
[ HDMI Audio ] is set to [ Off ].
•
[ LPCM Output ]
[ Digital Output ] is set to [ PCM only ].
•
The higher the sampling rate, the better the sound
quality.
[ HDMI Audio ]
Select the audio output setting when you
connect this DVD player and the TV with
a HDMI cable.
•
•
[ Audio Sync ]
Set the default delay time for audio output
when you play a video disc.
1.
2.
3.
[ Volume ]
[
Set the default volume level when you play
setting.
a disc.
1.
2.
3.
Note
setting is only available if the
setting is only available if the
[ On ] – audio output through the TV.
[ Off ] – disable audio output from the
TV.
Press OK.
b B to set the delay time.
Press
Press OK to conÀ rm and exit.
Press OK.
b B to set the volume.
Press
Press OK to conÀ rm and exit.
EN 29