Removing The Ice Maker Water Filler Pipe; From Inside The Freezer; Removing / Refitting The Water Tank - Ariston MSZ 70 NF COOLING 2004 Instruction Manual

Merloni Elettrodomestici
3.2.1.
•
The pipe in question is made of metal and clad with a heating element to prevent the water contents
from freezing.
•
The pipe is inclined downwards from the internal side to facilitate the flow of water.
•
At the top right of the rear of the fridge remove the 2 screws securing the union of the white water
filler pipe; remove the white plastic restraint and pull the grey union outwards by a few centimetres.
3.2.2.
•
Remove the ice tray
•
Detach the connector located behind the ice maker and above the filler pipe
•
Completely extract the pipe from the rear of the fridge.
•
Refit the pipe by performing the operations in reverse sequence
- Impedance test: approximately 9700 Ohm
- Inspection of pipe: visual, ensure pipe is not clogged
- Check that grey union (seal) is watertight and shows no signs of leaks
3.2.3.
•
Remove the upper salad crisper drawer and its cover
•
Remove the tank fixing screw
•
Expose the filler and drain pipes by peeling back the thermal insulation
•
Unscrew the Teflon unions and withdraw the pipes
•
Refit the parts by performing the steps in reverse sequence and ensuring the pipes are inserted in
their Teflon unions and then completely tightened
•
Check that the pipes are not crushed or kinked
•
Check the connections for possible signs of leaks
•
Remember to refit the guides for bends in the pipe to prevent possible kinks from forming for the
BLUE pipe = water inlet to tank
•
WHITE pipe = water to front union and to dispenser
Instruction Manual
Side-By-Side Refrigerator – Ariston MSZ 70 NF
R
EMOVING THE ICE MAKER WATER FILLER PIPE
F
ROM INSIDE THE FREEZER
R /
EMOVING REFITTING THE WATER TANK
:
Language
EN
Edition Page
2004.11.11 70 - 88