Controlling Your Directv Receiver; Setting Up Your Directv Remote; Onscreen Remote Setup - DirecTV Universal User Manual

CONTROLLING YOUR DIRECTV RECEIVER

The DIRECTV Universal Remote Control is designed
to give you access to features and functions found on
your original remote control. To use it with your brand of
DIRECTV Receiver, you will need to setup the remote
control by performing the following steps.

Setting Up Your DIRECTV Remote

1. Locate the DIRECTV Receiver's brand and model
number (on the back or bottom panel) and write it in
the spaces below.
BRAND: _________________________
MODEL: _________________________
2. Locate the 5-digit code for your DIRECTV Receiver.
(See pages 16-17.)
3. Power on the DIRECTV Receiver.
4. Slide the MODE switch to the DIRECTV position.
5. Press and hold the MUTE and SELECT keys until the
green light under the DIRECTV position fl ashes twice,
then release both keys.
6. Using the number keys, enter the 5-digit code. If per-
formed correctly, the green light under the DIRECTV
position fl ashes twice.
7. Aim the remote at your DIRECTV Receiver and press
the PWR key once. The DIRECTV Receiver should
turn off; if it does not, repeat steps 3 and 4, trying each
code for your brand until you fi nd the correct code.
8. For future reference, write down the working code for
your DIRECTV Receiver in the blocks below:

Onscreen Remote Setup

Once your remote is setup to work with your DIRECTV
Receiver, you can set it up for your other equipment us-
ing the steps detailed on the following pages, or you can
set it up it onscreen by pressing MENU, then SELECT
on Settings, Setup in the Quick Menu, then selecting
Remote from the left menu.
Remote Control UG-Philips.indd 9 Remote Control UG-Philips.indd 9
9
7/26/05 11:10:51 AM 7/26/05 11:10:51 AM