Deactive The Tv Input Select Key; Controlling Other Components - DirecTV Universal User Manual

Deactive the TV Input Select Key

If you want to deactivate the TV INPUT key, repeat
steps 1 through 3 from the previous section; the green
light will blink 4 times. Pressing the TV INPUT key will
now do nothing.

CONTROLLING OTHER COMPONENTS

The AV1 and AV2 switch positions can be setup to con-
trol a VCR, DVD, STEREO, second DIRECTV Receiver
or second TV. We recommend you use the onscreen
steps described on page 9, but you can also use the
manual method below:
1. Turn on the component you wish to control (e.g., your
DVD Player).
2. Locate the 5-digit code for your component. (See
pages 16-27.)
3. Slide the MODE switch to the AV1 (or AV2) position.
4. Press and hold the MUTE and SELECT keys at the
same time until the green light under AV1 (or AV2)
fl ashes twice, then release both keys.
5. Using the NUMBER keys, enter the 5-digit code for
the brand of component being setup. If performed
correctly, the green light under the selected position
fl ashes twice.
6. Aim the remote at your component and press the
PWR key once. The component should turn off; if it
does not, repeat steps 3 and 4, trying each code for
your brand until you fi nd the correct code.
7. Repeat steps 1 through 6 to setup a new component
under AV2 (or AV1).
8. For future reference write down the working code for
the component(s) setup under AV1 and AV2 below:
AV1:
COMPONENT: _______________________
AV2:
COMPONENT: _______________________
Remote Control UG-Philips.indd 11 Remote Control UG-Philips.indd 11
11
7/26/05 11:10:51 AM 7/26/05 11:10:51 AM