Advertisement
Quick Links
DIRECTV Advanced Entertainment Platform
RC90C remote setup
The DIRECTV Advanced Entertainment Platform (AEP) provides the best in live TV, on demand titles, and
services for commercial lodging and institution properties with professional installation. This manual
describes how to set up and use the RC90C remote with the AEP2-100 set-top box.
RC90C Remote
Installing Batteries
The remote requires two AA Batteries. Alkaline batteries are recommended. A diagram inside the battery
compartment of the remote indicates proper placement of the batteries. When batteries are properly
installed, the remote will start to work and the LEDs will light when keys are pressed.
11/2023
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DirecTV RC90C
Summary of Contents for DirecTV RC90C
- Page 1 DIRECTV Advanced Entertainment Platform RC90C remote setup The DIRECTV Advanced Entertainment Platform (AEP) provides the best in live TV, on demand titles, and services for commercial lodging and institution properties with professional installation. This manual describes how to set up and use the RC90C remote with the AEP2-100 set-top box.
- Page 2 Press and hold the key for more than 3 seconds <<Key1 + Key2>> Press and hold Key1 and Key2 keys simultaneously for more than 3 seconds Important features of the RC90C remote control • Default IR mode requires the remote and the IR sensor for the AEP2-100 set-top box to be in line of sight to each other and provides set-top box control without having to pair the remote with the AEP2-100 set-top box.
-
Page 3: Led Behavior
AEP2-100 set-top box functions. The remote and the IR sensor for the TV must be in line of sight of each other and the remote must be configured for the TV make/model in order to provide control of the above TV functions. LED Behavior RC90C Remote LEDs Remote operation Action LED Behavior Bootup Install batteries Red LEDs 1 &... -
Page 4: Remote Control Setup
The RC90C remote comes configured to control the AEP2-100 set-top box in IR mode. After completing the AEP2-100 set-top box installation and installing batteries in the RC90C remote, turn the TV on and point the remote at the IR sensor for the AEP2-100 set-top box and then press and hold <<... -
Page 5: Low Battery Voltage
While in Clear RF pairing mode, the remote will return to User mode and notify the user with an error blink (Red LEDs 1 & 2 will short blink 2x @ 200ms and then turn off) if: • User presses the <EXIT> key •... -
Page 6: Fcc Information
FCC information: FCC ID: 2AGOFRC469B This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the RC90C and is the answer not in the manual?
Questions and answers