Switching The Connected Bluetooth-Compatible Device; Deleting Registered Bluetooth-Compatible Devices; Using Cellphones; Screen During A Telephone Call - Clarion NX505E Owner's Manual

• For details on how to register Bluetooth-
compatible devices to cellphones, refer to
the User's Manual for the cellphone.
• The name of the device and the PIN can
be changed.
• Connections sometimes are not
made automatically if the Bluetooth-
compatible device is not set as "Waiting
for connection" or the device is not in
a standby state. For details, refer to the
User's Manual for the device.
• Reconnection is automatically retried if
the connection is broken, such as if the
Bluetooth-compatible device is too far
away.
• Problems on some Bluetooth-compatible
devices may cause communication
errors or prevent operations from being
performed or displayed properly. If this
happens, switch the Bluetooth functions
off then back on again. (Default: Off)
• When switching the Bluetooth functions
on the Bluetooth-compatible device off
then back on again, do the same for the
Bluetooth functions on the unit.
• When Bluetooth functions are turned off,
Bluetooth functions on the unit cannot
be operated. Also, connection to and
operations of the unit from Bluetooth-
compatible devices are no longer possible.
28 NX505E
Switching the connected
Bluetooth-compatible device
When two or more Bluetooth-compatible
devices are registered to the unit, the device
to be connected can be switched.
Notice
• Though up to five Bluetooth-compatible
devices can be paired, only one can be
connected to at any one time.
1
MENU
2
Set at [BT Device Connections]
3
Confirm that [Connect with
Bluetooth] is turned "ON".
4
Select for the device to be
switched.
5
Select the Bluetooth connection
mode.
MEMO:
• Switching the Bluetooth-compatible
device that is currently in use also
switches the device information, such
as incoming/outgoing call logs, to the
selected device.
• When a Bluetooth-compatible device is
restarted, it may not connect automatically,
depending on the type of device. Use this
procedure to connect the selected device
if it is not done automatically.
Deleting registered Bluetooth-
compatible devices
You can delete the information of paired
Bluetooth-compatible devices.
1
MENU
2
Set at [BT Device Connections]
3
for the device you want
to delete.
4
OK
MEMO:
• When the registration information of
a cellphone is deleted, the incoming/
outgoing call log and phonebook
information of the corresponding
cellphone also are deleted.
• If the unit is turned off while deleting
information registered for a Bluetooth-
compatible device, the information
sometimes cannot be deleted. If this
happens, turn the unit on and try deleting
the information again.

Using cellphones

Attention
• Do not leave cellphones inside the vehicle.
The inside of the vehicle gets hot under
the blazing sun, for example, and might
cause them to malfunction.

Screen during a telephone call

The following screen is displayed during a
telephone call:
Screen during a telephone call
:
This displays the option screen.
:
This mutes the phone outgoing volume.
:
This switches to telephone calls on the
cellphone unit.
Private call operation is sometimes not
switched to depending on the cellphone
you are using.
:
This ends the telephone call.
:
When the number entry screen is
displayed, enter the numbers for the
password, etc. during the telephone call.
Touching returns the screen to the
previous screen.