Table of Contents
Advertisement
3. Press the category button to view the numbers in selected
category.
4. Press
/
button to browse the list.
5. Press the desired contact number button to call the num-
ber.
6. Press the
button to return to the History list.
Notes:
The History list will be downloaded and updated automatically when
switching to
tab.
Maximum 6 phone numbers per category will be downloaded in this
unit.
Bluetooth Settings
Press the
tab in the top menu to select Bluetooth Set-
tings. The display will change accordingly
4
3
2
1
1. Bluetooth Settings List
2. Page Down Button
3. Page Up Button
4. Back Button
Navigating Bluetooth Settings
1. Press the
/
buttons to browse the list of Blue-
tooth operations:
Connect Last Device
Disconnect Device
Pair Device
Unpair Device
Reset Bluetooth
2. Press the item in the list to select the desired operation.
Pairing with an External Device
1. In the Bluetooth Settings tab, select "Pair Device" to enter
Pairing mode.
2. Activate Bluetooth on your device and search for "CLARI-
ON" on the device. Select "CLARION" to begin pairing.
3. If the device supports Simple Secure Pairing (SSP), both
device and head unit will display the same random 6 digits
pairing code.
4. Confirm the pairing code on the head unit and the de-
vice. Only the same pairing code will be authenticated and
paired successfully.
5. The unit can pair with a maximum of 5 devices simultane-
ously.
Notes:
If the device does not support SSP, the device may require the user
to enter the passkey "0000", depending on the device. Please check
the owner's manual of your device for further details.
Please make sure your device supports HFP or A2DP/AVRCP profiles.
Cancelling Pairing Mode
During Pairing mode, press the
ing mode. The display will return to the Bluetooth Settings
tab.
Connecting to a Bluetooth Device
Automatic Connection
The unit will automatically connect to the paired device af-
ter pairing. However, some devices will not allow automatic
connection to the device after pairing; please use the device
to manually connect to the unit. A connection can be estab-
lished at any source mode. If the connection is unsuccess-
ful, automatic connection will stop.
Automatic Connection
1. In the Bluetooth Settings tab, select "Connect Last De-
vice" to attempt to connect to the last connected device.
2. If the device is within range, a connection will be estab-
lished.
3. If no device is detected, the display will return to the Blue-
tooth Settings tab.
button to cancel Pair-
NX316AU
33
Advertisement
Table of Contents
