Table of Contents
Advertisement
Figure 5 Attaching the Adapter to a Wall
Figure 6 Attaching the Adapter to a Wall (Alternate)
2. Attach necessary cables and/or antennas to the AP.
3. Attach the AP to the secured mounting adapter as shown in
Figure
7.
a. Align the AP with a mounting adapter, placing the AP so that it's mounting tabs are at an angle
of approximately 30 degrees to the adapter.
4. Pushing toward the wall, rotate the AP clockwise until it clicks into place (see
Figure
7).
| Installation Guide
8
OAW-AP228 Wireless Access Point
Advertisement
Table of Contents
