Installing The 1510A Usb Driver - MTI 1510A Software Operation Manual

INSTALLING THE 1510A USB DRIVER

During Setup, the file mti1510A.INF was copied to the
Windows\INF folder on your computer. This file contains
instructions for loading the required USB drivers for the 1510A
Precision Signal Source.
Verify that this file exists. If it does not, manually copy the file from
the USB folder on the CDROM and placed it in your Windows\INF
folder.
After verifying that the INF file exists, connect the USB cable to the
1510A and connect it to a free USB port on your computer.
The Windows Found New Hardware Wizard screen will display.
Select No, not this time
and press Next.
Select Install the
software automatically
(Recommended) and
press Next.
If warned that the driver
has not passed Windows
Logo Testing, press
Continue Anyway.
Page 3 MTI Part Number 7001-0040
Revision 3.1 August 7, 2014