Installing The Software - MTI 1510A Software Operation Manual

INSTALLING THE SOFTWARE

The 1500 Series Precision Signal Source Software Package is
supplied on CD-ROM. This software must be installed
before connecting the 1510A Precision Signal Source to
your computer for the first time. Open a Windows Explorer
window to view the contents of the CD.
Double Click on the SETUP.EXE
program to begin the installation
process as illustrated:
As the program installation continues,
a welcome display will be produced,
followed by the License acceptance
display. At the conclusion of the
installation process, the software
loading completion display will appear
as illustrated below.
Click on the FINISH button to
complete the process.
At this time you may also wish to
install a copy of the Acrobat Reader
which is also included on the CD.
Note that the CD also includes a
folder, which contains PDF versions of
both the 1500 Series Users Manual
and a copy of this manual.
If necessary, open the Adobe folder
and install the Adobe Reader
application.
When all software has been installed,
remove the CD from the drive.
Page 2 MTI Part Number 7001-0040
Revision 3.1 August 7, 2014