Progressive; Sharpness - Philips DVP3124 User Manual

Progressive

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player's YPbPr jacks
to your TV that supports the progressive
video input. Otherwise, a distorted
picture will appear on the TV. For proper
progressive scan set up, see page 17.
In 'Video Setup Page', press   to
A
select { Progressive }, then press .
{ Off }
To disable Progressive Scan function.
{ On }
To enable Progressive Scan function.
Use   to select a setting and press
B
OK to confirm.
Follow the instructions shown on the

TV screen to confirm the selection (if
any).
If a distorted picture appears on the

TV screen, wait for 15 seconds for
auto recovery.
TIPS: The underlined option is the factory default setting.
Press  to go back to previous menu item. Press SETUP to exit the menu item.
01-39_dvp3120_3124_55_eng2.indd 31
DVD Menu Options

Sharpness

You can personalize your picture colour
by adjusting sharpness.
In 'Video Setup Page', press   to
A
select { Sharpness }, then press .
{ High }
Choose high to make the picture's edge
sharper.
{ Medium }
Choose medium to get a standard
picture.
{ Low }
Choose low to make the picture's edge
softer.
Use   to select a setting and press
B
OK to confirm.
(continued)
31
2007-12-12 2:36:22 PM