Downmix
This option allows you to set the stereo
analog output of your DVD player.
In 'Audio Setup Page', press to
A
select { Downmix }, then press .
{ Stereo }
Select this option when output delivers
sound from only the two front speakers.
{ LT/RT }
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
Use to select a setting and press
B
OK to confirm.
Digital Audio
The options included in Digital Audio are:
{Digital Output} and {LPCM Output}.
In 'Audio Setup Page', press to
A
select { Digital Audio Setup }, then
press .
Press to select an item, then press
B
to access.
Use to select a setting and press
C
OK to confirm.
TIPS:
The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
01-39_dvp3120_3124_55_eng2.indd 29
DVD Menu Options
Digital Output
Set the Digital Output according to your
optional audio equipment connection.
{ All }
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-).
{ PCM Only }
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG- multichannel signals
to PCM (Pulse Code Modulation).
{ SPDIF Off }
To deactivate the digital audio output.
For example, if you use the AUDIO OUT
sockets to connect to a TV or stereo
system.
LPCM Output
If you connect the DVD player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
{ 48K }
Playback a disc recorded at the sampling
rate of 48k�z.
{ 96K }
Playback a disc recorded at the sampling
rate of 96k�z. This rate can only be
achieved in Stereo-Classic (Flat) mode.
Tip:
– Discs are recorded at a certain sampling
rate. The higher the sampling rate, the better
sound quality. LPCM Output can be selected
only when PCM Only is activated.
(continued)
9
2007-12-12 2:36:22 PM