Using the Audio setup menu
A
Press SETUP on the remote control.
The system setup menu appears.
General
Audio
- -
Audio Setup Page
Downmix
Digital Audio
B
Press
to select { Audio Setup
Page }.
C
Press
to select an item, then press
to access.
Example: { Downmix }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D
Use
to select a setting and press
OK to confi rm.
Example: { Stereo }
The setting is selected and setup is
complete.
E
To exit, press SETUP.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
01-39_dvp3120_12_eng1.indd 29
01-39_dvp3120_12_eng1.indd 29
DVD Menu Options
A
Video
Preference
- -
B
A
B
C
Downmix
This option allows you to set the stereo
analog output of your DVD player.
In 'Audio Setup Page', press
select { Downmix }, then press
{ Stereo }
Select this option when output delivers
sound from only the two front speakers.
{ LT/RT }
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
Use
to select a setting and press
OK to confi rm.
Digital Audio
The options included in Digital Audio are:
{Digital Output} and {LPCM Output}.
In 'Audio Setup Page', press
select { Digital Audio }, then press
Press
to select an item, then press
to access.
Use
to select a setting and press
OK to confi rm.
(continued)
to
.
to
.
29
2007-01-15 4:17:16 PM
2007-01-15 4:17:16 PM