Inserting the battery
1. Spray Device: Insert a coin into the slot of the battery cover and orient towards open position (A).
Remove cover (B) and insert one 6 Volt battery with positive terminal towards the inside of the
device (C). Place cover back on. Screw cover towards off position (D).
2. Remote Control: Slide off the battery cover and insert one 6-volt alkaline battery, respecting
polarity (+ and -). Slide the cover back on.
: Check if the device is working by pressing the upper button no 1 on your remote control; you
NOTE
should hear a beep (make sure the spray device is in the "on" position).
A
Using the Remote Control
• The upper button (no 1) emits a sound signal.
• The center button (no 2) sends a short spray.
• The lower button (no 3) sends a long spray.
The Spray Settings - The spray is used to interrupt the dog and redirect his attention. The more a dog
seems absorbed by his activity, the longer the spray will have to be to stop and correct his behaviour,
and to redirect his attention.
No programming needed - Your spray device and remote control are now pre-programmed to make
their use easier for you and your pet!
Adjust the device onto the dog's neck with the Innotek
Make sure the spray nozzle is pointing towards the dog's snout.
Turn the device on.
DO'S AND DON'T'S
DO'S AND DON'T'S
• Never infl ict punishment, pain or cruelty on your pet – even if he refuses to listen.
• Reward your pet when he listens and obeys your commands.
• Never let the dog ignore a command he understands.
• Do not use the spray when you want your dog to obey a command that he does not understand yet.
• Never fi ll the device while your dog is wearing it because it may damage the fi ll-up valve.
• Never fasten a lead to the collar.
• To ensure that your dog does not make the connection between you and the Innotek
Commander
®
Remote Spray Trainer, don't let him see you prepare the device, neither for the fi rst
B
www.innotek.net
C
Spray Commander
®
D
logo facing inward.
®
®
Spray
- 35 -
- 35 -
Need help?
Do you have a question about the Spray Commander and is the answer not in the manual?
Questions and answers